Dakine Torque Driver
30 days to
About the Dakine Torque Driver
The Dakine Torque Driver snowboard/ski binding tool has a classic 'T' handle design for maximum grip and a nice smooth-running ratchet action. Classic simplicity.
Integrated into the driver is a 10mm hex socket, and packed into the handle you get #2 and #3 Phillips head screwdriver bits, #3 Pozidrive and 3/32 inch hex pieces plus a 1/4 inch flat head screwdriver. The T Handle also stores an 8mm and 10mm single-piece wrench.
No snowboarder or skier should head out without a binding/ski tool, if not for fine-tuning, then for safety's sake. The nuts, bolts and screws on all makes of snowboard/ski binding have a nasty habit of working loose, and often at the worst possible moments.
The Dakine Torque Driver binding tool gives you the freedom to relax while you ride or ski and is very handy on or off the mountain.
- 6 piece ratchet driver
- #2 and #3 phillips
- #3 pozidrive
- 3/32" hex
- 1/4" flat head
- 8mm and 10mm wrench
